extractor rebuild

Discussion in 'General Discussion' started by afss, Mar 12, 2011.

  1. Mar 12, 2011 #1
    afss

    afss New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    amongst all the other projects i should be doing i have stared rebuilding/restoring the extactor perry bee and i picked up from this thread viewtopic.php?f=19&t=3024

    most of the parts after or as i took them apart
     

    Attached Files:

    afss, Mar 12, 2011
    afss, Mar 12, 2011
  3. Mar 12, 2011 #2
    afss

    afss New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    parts were sand blasted... what a messy process, but still fun
     

    Attached Files:

    afss, Mar 12, 2011
    afss, Mar 12, 2011

  5. Mar 12, 2011 #3
    afss

    afss New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    and now have two coats of paint on them
     

    Attached Files:

    afss, Mar 12, 2011
    afss, Mar 12, 2011
  6. Mar 12, 2011 #4
    afss

    afss New Member

    Messages:
    26
    Likes Received:
    0
    Trophy Points:
    0
    i am trying to decide on a third coat or not and will probably also may do the basket over
     
    afss, Mar 12, 2011
    afss, Mar 12, 2011
  7. Mar 12, 2011 #5
    Iddee

    Iddee New Member

    Messages:
    8,996
    Likes Received:
    1
    Trophy Points:
    0
    Looks like a good size project. Keep us posted as it goes along.
     
    Iddee, Mar 12, 2011
    Iddee, Mar 12, 2011
  8. Mar 12, 2011 #6
    Sundance

    Sundance New Member

    Messages:
    76
    Likes Received:
    0
    Trophy Points:
    0
    Are you using food grade paint? Probably a must for
    the interior works.

    I rebuilt a couple old Woodman 30/60 radials and used
    CamCote on the interior as it was food grade. Not sure
    if it's still around or not.
     
    Sundance, Mar 12, 2011
    Sundance, Mar 12, 2011
  9. Mar 12, 2011 #7
    PerryBee

    PerryBee New Member

    Messages:
    5,829
    Likes Received:
    1
    Trophy Points:
    0
    Hey Sundance:

    I have read in several places about people using CamCote to paint interior of galvanized extractors and such. Just where is this stuff available? Regular hardware store or paint store or is it only available in some specialized stores?
     
    PerryBee, Mar 12, 2011
    PerryBee, Mar 12, 2011
  10. Mar 12, 2011 #8
    Iddee

    Iddee New Member

    Messages:
    8,996
    Likes Received:
    1
    Trophy Points:
    0
    I bought it at Sherwin-Williams.
     
    Iddee, Mar 12, 2011
    Iddee, Mar 12, 2011
  11. Mar 12, 2011 #9
    Sundance

    Sundance New Member

    Messages:
    76
    Likes Received:
    0
    Trophy Points:
    0
    Brushy Mt carries it
     
    Sundance, Mar 12, 2011
    Sundance, Mar 12, 2011